Winterizing Ones Water Heater

Posted by on Nov 10, 2014 in Water Heater Repair Denver, Water Heating Savings | 0 comments

We enjoy to pass along ideas on how to conserve on energy expenses at home here at Water Heater Repair Denver. Here are some of the best ways to get ones water heater ready for the winter.

A simple way to inspect ones water heater’s need for insulation is to put ones hand near to or on the outside of the storage tank. It is feels warm, insulating the tank is advised. Throughout the winter season this heat loss you just felt can build up. Conversely in the summertime, if the water heater is located inside the house, and not in a garage, it can add heat to the space that you are attempting to cool. The heat you feel is obviously heat being lost. If it is not warm at all that is a great sign that the tank’s internal insulation is in respectable shape. Brand-new water heating systems are being made with a nice quantity of internal insulation today. You can examine the manufacture’s label to see exactly what the R-value is. If it R-24 or greater, one should be in terrific shape without having to include an insulation blanket to the water heater.

Denver Water Heater Blankets

The treatment for this heat loss is with a water heater blanket or wrap. First check with your local energy company, for some have insulation kits at decreased costs for homeowners. A hot water heater blanket will can be found in various sizes depending on the gallon size of the storage tank. The higher the R-value, the more insulation power it has. We would recommend getting at least an R-11.

The blankets are easy to set up. They will have insulation tape to finish the joints of the blanket. The shinny or vinyl side goes on the outside.

For gas water heaters, wrap it all around, leaving the top flue unwrapped, and do not wrap around the controller on the bottom. Likewise, do not wrap the T&P valve handle, or the bottom of tank for that is where air enters. For electric water heaters, the top can be wrapped for there is not an exhaust flue, however do not wrap the heating-element access panels.

Water heater blankets will last quite a long period of time. You could even have the ability to utilize the very same one once again whenever the water heater is replaced, providing it’s the very same size storage tank.

Water Heater Pipe Insulation

There are 2 types of pipe insulation that should be used for a water heater. For pipes that are within 6 inches of the water heater exhaust flue, fiberglass insulation wrap ought to be made use of and should be attached with either high temperature aluminum tape or wire. Foam insulation sleeves can be used for all the pipes that are additionally away then 6 inches of the flue then.

The United States Department of Energy suggests that house owners insulate at least 6 feet of the pipe coming into and out of the hot water heater. This can increase the temperature level at the faucets 2 to 4 degrees and conserve money on heating. We likewise recommend wrapping both the hot and cold pipes too simply due to the fact that every little bit helps.

Energy Savings from Denver Water Heater Insulation

Insulating an inefficient water heater can cut the cost of running that heater by 5 % to 10 %. Depending on the model, that can save anywhere from $5 to $20 per year, meaning that a water heater blanket can be paid for in 1 to 4 years. Adding insulation could minimize standby heat losses by 25 % – 45 % and save about 4 % – 9 % in water heating expenses.

What others round the web are saying: