Water Heater Replacement

When To Replace a Water Heater

Water heaters are non-issues UNTIL you get hit with that first icy shower or giant puddle in the basement. Then you need to think fast: should one repair or replace?Water Heater Replacement Denver CO

If it’s a conventional storage-tank water heater nearing the end of its 10-13-year life, replacement is obvious. New models are up to 20 % more effective and can conserve up to $700 in energy expenses over the life of the unit. However, if your water heater is just a couple of years old, repair work could be the way to go. Uncertain whether to fix or change?

Which Type of Water Heater is Best?

There are 2 kinds of standard water heaters, gas and electric. An electric water heater can be utilized almost anywhere. A gas water heater is most likely to be set up in a house that already makes use of gas for an additional home appliance such as a furnace or stove. Building regulations could dictate the positioning of gas water heaters, limiting them to locations outside of typical home activity.

It is most likely if you are changing a water heater, you’ll just change it with the same kind of system that was currently there. However, there are upgrade possibilities that ought to be thought about. For example: if space permits, you could decide to enhance the system’s holding capacity to accommodate your growing household. Another essential factor to consider is the system’s energy efficiency. Water heater replacement time is the perfect time to lower your energy bill by choosing a water heater that is more energy reliable.

When trying to find a water heater, consider these features

Gallon ability (40-gallon and 50-gallon heaters are most usual).

Recovery rate (the number of gallons the heater will warm in an hour).

Measurements (width and height– physical area may restrict your capability to update your system’s capability – will the heater fit in the area you have for it?).

The energy efficiency score (a sticker on the side need to note the approximated yearly cost of operation for the unit).

Before making any repairs or buying a brand-new water heater, inspect the nameplate on the side of your existing unit. Below you will find practical information consisting of the tank capability, insulation R-value, installation standards, working pressure, model and identification number. If you have an electric water heater, the nameplate will also list the wattage capacity and voltage of the heating elements.

Don’t hesitate to contact High Water Plumbing & Heating with any water heater installation need you have.


Plumbing Repair Denver

Back Home